Selected Publications of Key Personnel

A sampling of our published works from IC² personnel’s collective research and development efforts.  Much of our work over the years has focused in MEMS sensor R&D for aerospace applications.

MEMS Sensor R&D and Related Research

Year Publication
2017 D. Mills, C. Barnard, and M. Sheplak, "Characterization of a Hydraulically Smooth Wall Shear Stress Sensor for Low-Speed Wind Tunnel Applications," 55th AIAA Aerospace Sciences Meeting, AIAA SciTech, AIAA Paper 2017-0478, Grapevine, TX, January 9-13, 2017.
2016 T. Chen, C. Barnard, D. Mills, S. Horowitz, M. Sheplak, "Instrumentation-Grade Shear Stress Sensors for Direct Measurement of Mean and Fluctuating Skin Friction", presented at 20th Test Instrumentation Workshop (ITEA), Las Vegas, NV, May 10-12, 2016.
2016 D. Mills, S. Horowitz, T. Chen, and M. Sheplak, “Sapphire Micromachined Wall Shear Stress Sensors for High-Temperature Skin-Friction Measurements”, presented at 20th Test Instrumentation Workshop (ITEA), Las Vegas, NV, May 10-12, 2016.
2016 D. Mills, D. Blood, and M. Sheplak, “Characterization of a sapphire optical wall shear stress sensor for high-temperature applications,” 54th AIAA Aerospace Sciences Meeting, AIAA SciTech, AIAA Paper 2016-2016, San Diego, CA, January 4-8, 2016.
2015 D. Mills, D. Blood, and M. Sheplak, “Development of a sapphire optical wall shear stress sensor for high-temperature applications,” in Digest Tech. Papers Transducers ’15 Conference, Anchorage, AK, June 21-25, 2015, pp. 1295-1298.
2015 Horowitz, S., Sheplak, M., “Micromachined Acoustic Energy Harvesters", in Micro Energy Harvesting (eds D. Briand, E. Yeatman and S. Roundy), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany. doi: 10.1002/9783527672943.ch13
2013 Horowitz, S., Allen, M., Fox, J., Cortes, J., Barkett, L., Mathias, D., Hernandez, C., Martin, A., Sanghadasa, M, Marotta, S., “A Low Frequency MEMS Vibration Sensor for Low Power Missile Health Monitoring,” presented at IEEE Aerospace Conference 2013, Big Sky, MT, Mar. 2-9, 2013.
2012 M. D. Williams, B. A. Griffin, T. N. Reagan, J. R. Underbrink, and M. Sheplak, “An AlN MEMS Piezoelectric Microphone for Aeroacoustic Applications”, Journal of Microelectromechanical Systems, vol. 21, no. 2, 04/2012.
2012 B. A. Griffin, V. Chandrasekaran, and M. Sheplak, “Thermoelastically Actuated Acoustic Proximity Sensor with Integrated Through-Silicon Vias”, Journal of Microelectromechanical Systems, vol. 21, no. 2, 04/2012.
2012 Horowitz, S., Mathias, D., Fox, J., Cortes, J., Sanghadasa, M., Ashley, P., “Effects of Scaling and Geometry on the Performance of Piezoelectric Microphones,” Sensors and Actuators A: Physical, Vol. 185, pg. 24-32, 2012.
2012 Horowitz, S., Fox, J., Mathias, D., Cortes, J., Allen, M., Barkett, L., Sanghadasa, M, “Miniaturized Nanocomposite Piezoelectric Microphones for UAS Applications,” presented at SENSIAC – 2012 Joint Meeting of the Military Sensing Symposia (MSS) Specialty Groups on Battlespace Acoustic, Seismic, Magnetic, and Electric-Field Sensing and Signatures (BAMS), Washington, DC, Oct. 22-25, 2012.
2012 Marotta, S., Horowitz, S., “A Low Frequency MEMS Vibration Sensor for Low Power Missile Health Monitoring,” presented at RAM 5 Workshop, Huntsville, AL, Oct. 16-17, 2012.
2012 R. Dieme, J. Zhang, N. G. Rudawski, K. Jones, G. Bosman, M. Sheplak, and T. Nishida, “Process Dependence of 1/f Noise and Defects in Ion Implanted p-Type Piezoresistors”, Journal of Applied Physics, vol. 112, 2012.
2012 M. D. Williams, F V. Keulen, and M. Sheplak, “Modeling of Initially Curved Beam Structures for Design of Multistable MEMS”, Journal of Applied Mechanics, vol. 79, no. 1, 01/2012.
2012 B. Homeijer, B. A. Griffin, M. D. Williams, B. V. Sankar, and M. Sheplak, “Composite Circular Plates with Residual Tensile Stress Undergoing Large Deflections”, Journal of Applied Mechanics, vol. 79, no. 2: ASME, 03/2012.
2012 J. Meloy, J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak,“Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications”, Hilton Head 2012, Hilton Head Island, SC, 06/2012.
2012 Fox, J., Horowitz, S., Cortes, J., Allen, M., Mathias, D., Barkett, L., Sanghadasa, M, “Fabrication and Testing of Suspended Piezoelectric Nanocomposite Membranes,” presented at AVS 59th International Symposium and Exhibition, Tampa, FL, Oct. 28-Nov. 2, 2012.
2012 M. D. Williams, B. A. Griffin, T. N. Reagan, J. R. Underbrink, and M. Sheplak, “Characterization of Aeroacoustic MEMS Microphones for Aircraft Fuselage Arrays”, AIAA Journal, vol. 50, pp. 2744-2752, 12/2012.
2011 B. A. Griffin, M. D. Williams, C. S. Coffman, and M. Sheplak, “Aluminum Nitride Ultrasonic Air-Coupled Actuator “, Journal of Microelectromechanical Systems, vol. 20, no. 2, pp. 476-486, 04/2011.
2011 D. Blood, D. Mills, M. Sheplak, and T. Schmitz, “Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication”, Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.
2011 L. Cattafesta, and M. Sheplak, “Actuators for Active Flow Control”, Annual Review of Fluid Mechanics, vol. 43, no. 1, pp. 247–272, 2011.
2011 J. Meloy, J. Griffin, J. Sells, V. Chandrasekharan, L. Cattafesta, and M. Sheplak, “Experimental Verification of a MEMS Based Skin Friction Sensor for Quantitative Wall Shear Stress Measurement”, 41st AIAA Fluid Dynamics Conference and Exhibit, AIAA 2011-3995, Honolulu, Hawaii, 06/2011.
2011 B. A. Griffin, V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, “Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source”, International Journal of Solids and Structures, 02/2011.
2011 J. Sells, V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, “Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor”, 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 – 80, 2011.
2011 A. Edstrand, C. Bahr, M. D. Williams, J. Meloy, T. N. Reagan, D. Wetzel, M. Sheplak, and L. Cattafesta, An Aeroacoustic Microelectromechanical Systems (MEMS) Phased Microphone Array, , 5aEA15, vol. 129, no. 4, pp. 2645, May, 2011.
2011 B. A. Griffin, D. Mills, T. Schmitz, and M. Sheplak, “A Sapphire Based Fiber Optic Dynamic Pressure Sensor for Harsh Environments: Fabrication and Characterization”, 49th AIAA Aerospace Sciences Meeting, AIAA-2011-1098, Orlando, FL, AIAA, 01/2011.
2011 V. Chandrasekharan, J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, “A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor”, Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.
2011 M. Rueff, T. Schmitz, B. A. Griffin, D. Mills, and M. Sheplak, “Evaluation of Optical Fiber Positioning using Silicon V-Grooves”, 39th North American Manufacturing Research Conference, Corvallis, OR, 2011.
2011 Mills, D. A., Blood, D., Collins, J., Sheplak, M., and Oates, W., “High Temperature, Optical Sapphire Pressure Sensors for Hypersonic Vehicles,” Technical Meeting for FAA Center of Excellence for Commercial Space Transportation (COE CST), Boulder, CO, November 2011.
2011 C. Bahr, N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta,“Measurement of Phased Array Point Spread Functions for use with Beamforming”,17th AIAA/CEAS Aeroacoustics Conference, AIAA 2011-2767, Portland, OR, June, 2011.
2010 V. Chandrasekharan, J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, “A MEMS Direct Skin Friction Sensor”, Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
2010 D. Alexander, C. Barnard, B. A. Griffin, and M. Sheplak, “Characterization of a High-Frequency Pressure-Field Calibration Method”, 159th Meeting of the Acoustical Society of America, Baltimore, MD, 04/2010.
2010 B. A. Griffin, D. Mills, T. Schmitz, and M. Sheplak, Fabrication and characterization of a sapphire based fiber optic microphone for harsh environments, , Cancun, Mexico, presentation at the 2nd Pan American/Iberian Meeting on Acoustics, 11/2010.
2010 V. Chandrasekharan, J. Naughton, and M. Sheplak, “Shear Stress Measurements”,Encyclopedia of Aerocpace Engineering, 1, vol. 1, 2010.
2010 V. Chandrasekharan, J. Sells, D. P. Arnold, and M. Sheplak, “Effect of dynamic pressure on direct shear stress sensor design”, 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-004, 01/2010.
2010 T-A. Chen, D. Mills, V. Chandrasekharan, H. Zmuda, and M. Sheplak, “Optical Miniaturization of a MEMS-Based Floating Element Shear Stress Sensor with Moir”, 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-0498, 01/2010.
2010 M. D. Williams, B. A. Griffin, A. Ecker, J. Meloy, and M. Sheplak, “An Aluminum Nitride Piezoelectric Microphone for Aeroacoustics Applications”, Hilton Head 2010: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, Transducer Research Foundation, Inc., 06/2010.
2010 J. Sells, V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, “Passive Wireless Direct Shear Stress Measurement”, Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.
2010 A. Kasyap, A. Phipps, T. Nishida, M. Sheplak, and L. Cattafesta, “Development of MEMS-based Piezoelectric Vibration Energy Harvesters”, SEC IMAC, 02/2010.
2010 M. D. Williams, B. A. Griffin, J. Meloy, and M. Sheplak, “A microelectromechanical systems-based piezoelectric microphone for aeroacoustic measurements”, 2nd Pan-American/Iberian Meeting on Acoustics, Cancun, Mexico, Acoustical Society of America, 11/2010.
2010 B. A. Griffin, D. Mills, T. Schmitz, and M. Sheplak, “Sapphire Sensors for High Temperature Applications”, Florida Center for Advanced Aero-Propulsion Annual Technical Symposium, Tallahassee, FL, 08/2010.
2009 B. A. Griffin, M. D. Williams, and M. Sheplak, “A piezoelectric microelectromechanical systems ultrasonic radiator”, 158th Meeting of the Acoustical Society of America, San Antonio, TX, OCT, 2009.
2009 T. Schultz, F. Liu, M. Sheplak, L. Cattafesta, and M. Jones, “A Comparison Study of Normal-Incidence Acoustic Impedance Measurements of a Perforate Liner”, 15th AIAA/CEAS Aeroacoustics conference, AIAA 2009-3301, Miami, FL, May, 2009.
2009 L. Cattafesta, and M. Sheplak, Fundamentals and Applications of Modern Flow Control, , vol. 231, pp. 149-175, DEC, 2009.
2009 B. A. Griffin, M. Sheplak, and T. Schmitz, “High Temperature Direct Shear Stress and Pressure Sensors”, NEMS/MEMS Workshop at Redstone Arsenal, Huntsville, AL, 09/2009.
2009 V. Chandrasekharan, J. Sells, D. P. Arnold, and M. Sheplak, “Characterization of a MEMS-Based Floating Element Shear Stress Sensor”, 47th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2009-316, Orlando, FL, 01/2009.
2009 V. Chandrasekharan, J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, “A Metal-On-Silicon Differential Capacitive Shear Stress Sensor”, Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
2009 F. Liu, A. Phipps, S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “Acoustic energy harvesting using an electromechancal Helmholtz Resonator”, the 157th Meeting of the Acoustical Society of America, Portland, OR, MAY, 2009.
2009 M. D. Williams, F V. Keulen, and M. Sheplak, “Modeling of Initially Curved Beam Structures for Design of Multistable MEMS”, 2009 ASME International Mechanical Engineering Congress, IMECE2009-1130, Lake Buena Vista, FL, November, 2009.
2009 A. Phipps, F. Liu, L. Cattafesta, M. Sheplak, and T. Nishida, “Demonstration of a wireless, self-powered electroacoustic liner system”, J. Acoust. Soc. Am, vol. 125, no. 2, pp. 873-881, FEB, 2009.
2008 D. Martin, K. Kadirvel, T. Nishida, and M. Sheplak, “A Surface Micromachined Capacitive Microphone for Aeroacoustic Applications”, Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2008.
2008 J. Liu, D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, “Nonlinear Model and System Identification of a Capacitive Dual-Backplate MEMS Microphone”, J. Sound Vib., vol. 309, no. 1-2, pp. 276-292, JAN, 2008.
2008 J. Agashe, M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, , vol. 7: Springer, pp. 25-32, 2008.
2008 Y. Li, V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, “A MEMS Shear Stress Sensor for Turbulence Measurements”, 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
2008 F. Liu, A. Phipps, S. Horowitz, K. Ngo, L. Cattafesta, T. Nishida, and M. Sheplak, “Acoustic energy harvesting using an electromechanical Helmholtz resonator”, J. Acoust. Soc. Am., vol. 123, no. 4, APR, 2008.
2008 B. A. Griffin, B. Homeijer, M. D. Williams, B. V. Sankar, and M. Sheplak, “Large Deflections of Clamped Composite Circular Plates with Initial In-Plane Tension”, IMAC XXVI, A Conference and Exposition on Structural Dynamics, Orlando, FL, February, 2008.
2008 M. Papila, M. Sheplak, and L. Cattafesta, “Optimization of Clamped Circular Piezoelectric Composite Actuators”, Sensors & Actuators A, vol. 147, no. 1, pp. 310-323, SEP, 2008.
2008 Y. Li, V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, “A laterally-implanted piezoresistive skin-friction sensor”, Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.
2008 J. Liu, D. Martin, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, “Harmonic Balance Nonlinear Identification of a capacitive dual-backplate MEMS microphone”, J. Microelectromechanical Systems, vol. 17, no. 3, pp. 698-708, JUN, 2008.
2008 D. Martin, K. Kadirvel, T. Nishida, and M. Sheplak, “An Instrumentation Grade MEMS Condenser Microphone for Aeroacoustic Measurements”, 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-257, January, 2008.
2008 M. Sheplak, L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, , vol. 7, pp. 67-73, 2008.
2007 M. D. Williams, B. A. Griffin, B. Homeijer, B. V. Sankar, and M. Sheplak, “The Nonlinear Behavior of a Post-Buckled Circular Plate”, 6th IEEE Conference on Sensors, October, 2007.
2007 M. D. Williams, B. A. Griffin, B. Homeijer, B. V. Sankar, and M. Sheplak, “Vibration of Post-Buckled Homogeneous Circular Plates”, IEEE Ultrasonics Symposium, 2007: IEEE, October, 2007.
2007 K. Kadirvel, D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, “Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone”, 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.
2007 S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “Development of a micromachined piezoelectric microphone for aeroacoustics applications”, J. Acoust. Soc. Am., vol. 122, no. 6, pp. 3428-3436, DEC, 2007.
2007 D. Martin, J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, “A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements”, J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.
2007 T. Schultz, M. Sheplak, and L. Cattafesta, “Uncertainty analysis of the two-microphone method”, J. Sound Vib., vol. 304, no. 1-2, pp. 91-109, JUL, 2007.
2007 B. Homeijer, L. Cattafesta, T. Nishida, and M. Sheplak, “Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements”, 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.
2007 F. Liu, S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “A multiple degree of freedom electromechanical Helmholtz resonator”, J. Acoust. Soc. Am., vol. 122, no. 1, pp. 291-301, JUL, 2007.
2007 Y. Li, T. Nishida, D. P. Arnold, and M. Sheplak, “Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers”, Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
2007 B. Guo, J. Li, H. Zmuda, and M. Sheplak, “Multifrequency Microwave-Induced Thermal Acoustic Imaging for Breast Cancer Detection”, IEEE Trans. Bio. Eng., vol. 54, no. 11, pp. 2000-2010, NOV, 2007.
2006 Y. Li, M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, “Modeling and optimization of a side-implanted piezoresistive shear stress sensor”, Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
2006 T. Schultz, L. Cattafesta, and M. Sheplak, “Modal decomposition method for acoustic impedance testing in rectangular ducts”, 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
2006 L. Cattafesta, D. P. Arnold, and M. Sheplak, “Measurement needs and challenges for the characterization of flow control actuators”, 25th AIAA Aerodynamic Measurement Technology and Ground Testing Conf., San Francisco, CA, JUN, 2006.
2006 T. Schultz, L. Cattafesta, and M. Sheplak, “Modal decomposition method for acoustic impedance testing in square ducts”, J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.
2006 V. Chandrasekharan, M. Sheplak, and L. Cattafesta, “Experimental Study of Acoustic Impedance of MEMS-Based Micro-Perforated Liners”, 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2401, Cambridge, MA, May, 2006.
2006 S. Kadirvel, F. Liu, S. Horowitz, T. Nishida, K. Ngo, L. Cattafesta, and M. Sheplak, “A Self-Powered Wireless Active Acoustic Liner”, 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
2006 F. Liu, S. Horowitz, L. Cattafesta, and M. Sheplak, “Optimization of an Electromechanical Helmholtz Resonator”, 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
2006 T. Schultz, L. Cattafesta, and M. Sheplak, “Comparison of the two microphone method and the modal decomposition method for acoustic impedance testing”, 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2695, Cambridge, MA, May, 2006.
2006 R. Dieme, G. Bosman, M. Sheplak, and T. Nishida, “Source of Excess Noise in Silicon Piezoresistive Microphones”, J. Acoustical Society of America, vol. 119, pp. 2710-2720, MAY, 2006.
2006 D. Martin, J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, “Development of a MEMS Dual Backplate Capacitive Microphone for Aeroacoustic Measurements”, 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1246, Reno, NV, January, 2006.
2006 T. Nishida, R. Dieme, M. Sheplak, and G. Bosman, “Noise Modeling and Characterization of Piezoresistive Transducers”, Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-15392, November, 2006.
2006 T. Nishida, J. Lin, K. Ngo, F. Ren, D. Norton, S. J. Pearton, L. Cattafesta, M. Sheplak, J. Jun, A K. V.S., et al., “Wireless Hydrogen Sensor Self-powered Using Ambient Vibration and Light”,Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-14644, November, 2006.
2006 S. Prasad, Q. Gallas, S. Horowitz, B. Homeijer, B. V. Sankar, L. Cattafesta, and M. Sheplak, “An Analytical Electroacoustic Model of a Piezoelectric Composite Circular Plate”, AIAA Journal, vol. 44, no. 10, pp. 2311-2318, OCT, 2006.
2006 S. Horowitz, M. Sheplak, L. Cattafesta, and T. Nishida, “A MEMS Acoustic Energy Harvester”, J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.
2006 J. Mathew, Q. Song, B. V. Sankar, M. Sheplak, and L. Cattafesta, “Optimized Design of Piezoelectric Flap Actuators for Active Flow Control”, AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.
2006 B. Homeijer, B. A. Griffin, T. Nishida, L. Cattafesta, and M. Sheplak, “Design and Optimization of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements”,presentation at the 4th Joint Meeting of the ASA and ASJ, Honolulu, HI, DEC, 2006.
2006 M. Papila, R. T. Haftka, T. Nishida, and M. Sheplak, “Piezoresistive Microphone Design Pareto Optimization: Tradeoff between Sensitivity and Noise Floor”, J. Microelectromechanical Systems, vol. 15, no. 6, pp. 1632-1643, DEC, 2006.
2006 J. Liu, M. Sheplak, and B. Mann, “Pull-In Instability and Shock Load Response of a MEMS Dual-Backplate Capacitive Microphone”, 43rd Annual Technical Meeting of the Society of Engineering Science (SES 06), State College, PA, AUG, 2006.
2006 S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “A Micromachined Piezoelectric Microphone for Aeroacoustics Applications”, Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
2006 A K. V.S., A. Phipps, M. Sheplak, K. Ngo, T. Nishida, and L. Cattafesta, “Lumped Element Modeling of Piezoelectric Beams for Vibrational Energy Reclamation”, Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-, November, 2006.
2005 S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “Design and Characterization of a Micromachined Piezoelectric Microphone”, 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.
2005 J. Chao, W. Shyy, S. Thakur, M. Sheplak, and R. Mei, “Effect of Conjugate Heat Transfer on MEMS-Based Thermal Shear Stress Sensor”, Numerical Heat Transfer-A, vol. 48, no. 3, pp. 197-217, AUG, 2005.
2005 B. A. Griffin, B. Homeijer, V. Chandrasekaran, B. V. Sankar, and M. Sheplak, “A Nonlinear Model for the Large Deflections and Buckling of Circular Composite Diaphragms”, 2005 ASME International Mechanical Engineering Congress & Exposition, November, 2005.
2005 S. Horowitz, M. Sheplak, L. Cattafesta, and T. Nishida, “MEMS Acoustic Energy Harvester”, 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
2005 D. Martin, J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, “Dual-Backplate Capacitive Aeroacoustic Microphone”, 150th Meeting of the Acoustical Society of America, Minneapolis, MN, OCT, 2005.
2005 F. Liu, S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “A transfer matrix formulation of an electromechanical Helmholtz resonator”, ASA Fall Meeting, Minneapolis, MN, OCT, 2005.
2005 J. Mathew, C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, “Design and Characterization of an Anechoic Aeroacoustic Facility”, 150th Meeting of the Acoustical Society of America, Minneapolis, MN, vol. 118, no. 3, pp. 1943, OCT, 2005.
2005 T. Schultz, L. Cattafesta, and M. Sheplak, “Modal Decomposition Method for High Frequency Acosutic Impedance Testing”, ASA Fall Meeting, Minneapolis, MN, October, 2005.
2005 J. Liu, D. Martin, K. Kadirvel, T. Nishida, M. Sheplak, and B. Mann, “Nonlinear Identification of a Capacitive Dual-Backplate MEMS Microphone”, 2005 ASME International Design Engineering Technical Conferences, Paper DETC2005-84591, Long Beach, CA, September, 2005.
2005 D. Martin, K. Kadirvel, J. Liu, R. M. Fox, M. Sheplak, and T. Nishida, “Surface and Bulk Micromachined Dual Back-Plate Condenser Microphone”, 18th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2005), Miami, FL, January, 2005.
2005 V. Chandrasekaran, A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, “Dynamic calibration technique for thermal shear-stress sensors”, Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.
2005 J. Mathew, C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, “Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility”, 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-3052, Monterey, CA, May, 2005.
2005 J. Mathew, C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, “Characterization of an Anechoic Wind Tunnel Facility”, Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Paper IMECE2005-81737, Orlando, FL, November, 2005.
2005 J. Liu, D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, “Nonlinear System Identification of a MEMS Dual-Backplate Capacitive Microphone by Harmonic Balance Method”, 2005 ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-82880, Orlando, FL, November, 2005.
2004 R. Taylor, F. Liu, S. Horowitz, K. Ngo, T. Nishida, L. Cattafesta, and M. Sheplak, “Technology Development for Electromechanical Acoustic Liners”, Active 04 Paper a04-093, Williamsburg, VA, September, 2004.
2004 Q. Gallas, R. Holman, R. Raju, R. Mittal, M. Sheplak, and L. Cattafesta, “Low Dimensional Modeling of Zero-Net Mass Flux Actuators”, 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.
2004 R. Dieme, G. Bosman, M. Sheplak, and T. Nishida, “Sources of Excess Noise in Silicon Piezoresistive Microphones”, 148th Meeting Acoustical Society of America, San Diego, CA, NOV, 2004.
2004 Z. Wang, J. Li, P. Stoica, M. Sheplak, and T. Nishida, “Constant-Beamwidth and Constant-Powerwidth Wideband Robust Capon Beamformers for Acoustic Imaging”, J. Acoust. Soc. Am., vol. 116, no. 3, pp. 1621-1631, SEP, 2004.
2004 B. Carroll, E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, “Aero-Optic Measurement Facility Characterization”, 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.
2004 L. Cattafesta, R. T. Haftka, J. Goosen, and F V. Keulen,“Uncertainty-based Design Optimization of a Micro Piezoelectric Composite Energy Reclamation Device”, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, September, 2004.
2004 S. Horowitz, T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, “A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor”, 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
2004 K. Kadirvel, R. Taylor, S. Horowitz, W. Hunt, M. Sheplak, and T. Nishida, “Design and Characterization of a MEMS Optical Microphone”, 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1030, Reno, NV, January, 2004.
2004 S. Horowitz, T-A. Chen, L. Cattafesta, M. Sheplak, T. Nishida, and V. Chandrasekaran, “Optical Flow Sensor Using Geometric Moire Interferometry”, 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.
2004 M. Sheplak, L. Cattafesta, and T. Nishida, “MEMS Shear Stress Sensors: Promise and Progress”, 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
2004 S. Horowitz, T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, “A Wafer-Bonded, Floating Element Shear-Stress Sensor”, Solid State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, pp. 13-18, June, 2004.
2004 Y. Wang, J. Li, P. Stoica, M. Sheplak, and T. Nishida, “Wideband RELAX and Wideband CLEAN for Aeroacoustic Imaging”, J. Acoust. Soc. Am., vol. 115, no. 2, pp. 757-767, MAR, 2004.
2003 D. P. Arnold, T. Nishida, L. Cattafesta, and M. Sheplak, “A directional acoustic array using silicon micromachined piezoresistive microphones”, J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.
2003 V. Chandrasekaran, B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, “An Analytical Model for Thermoelastic Actuation of Composite Diaphragms”, 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.
2003 F. Liu, S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “A Tunable Electromechanical Helmholtz Resonator”, 9th AIAA/CEAS Aeroacoustics Conference and Exhibit, AIAA Paper 2003-3145, Hilton Head, SC, May, 2003.
2003 S. Tuzzo, D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, “A MEMS-Based Sound Intensity Probe”, 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.
2003 X. Li, R. Wu, H. Rasmi, J. Li, L. Cattafesta, and M. Sheplak, “An Acoustic Proximity Ranging System for Monitoring the Cavity Thickness”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 50, no. 7, pp. 898-910, JUL, 2003.
2003 Y. Wang, J. Li, P. Stoica, M. Sheplak, and T. Nishida, “Wideband RELAX and Wideband CLEAN for Aeroacoustic Imaging”, 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3197, Hilton Head, SC, May, 2003.
2003 X. Li, R. Wu, H. Rasmi, J. Li, L. Cattafesta, and M. Sheplak, “Acoustic Proximity Ranging in the Presence of Secondary Echoes”, IEEE Transactions on Instrumentation and Measurement, vol. 52, no. 5, pp. 1593-1605, OCT, 2003.
2003 Y. Utturkar, R. Holman, R. Mittal, B. Carroll, M. Sheplak, and L. Cattafesta, “A Jet Formation Criterion for Synthetic Jet Actuators”, 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0636, Reno, NV, January, 2003.
2003 M. Papila, R. T. Haftka, T. Nishida, and M. Sheplak, “Piezoresistive Microphone Design Pareto Optimization: Tradeoff Between Sensitivity and Noise Floor”, 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2003-1632, Norfolk, VA, April, 2003.
2003 B. Kang, S. Kim, J. Kim, F. Ren, K. Baik, S. J. Pearton, B. P. Gila, C. Abernathy, C. Pan, G. Chen, et al., “Effect of External Strain on the Conductivity of AlGaN/GaN High-Electron-Mobility Transistors”, Applied Physics Letters, vol. 83, no. 23, pp. 4845-4847, DEC, 2003.
2003 Q. Gallas, G. Wang, M. Papila, M. Sheplak, and L. Cattafesta, “Optimization of Synthetic Jet Actuators”, 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.
2003 A. Appukuttan, W. Shyy, M. Sheplak, and L. Cattafesta, “Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors”, Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.
2003 Z. Wang, J. Li, T. Nishida, and M. Sheplak, “Robust Capon Beamformers for Wideband Acoustic Imaging”, 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3198, Hilton Head, SC, May, 2003.
2003 Q. Gallas, R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta, “Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators”, AIAA Journal, vol. 41, issue 2, no. 2, pp. 240-247, MAR, 2003.
2002 S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner”, 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.
2002 Q. Gallas, J. Mathew, A K. V.S., R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta,“Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators”, 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0125, Reno, NV, January, 2002.
2002 J. Naughton, and M. Sheplak, “Modern Developments in Shear Stress Measurement”,Progress in Aerospace Sciences, vol. 38, pp. 515-570, JUL, 2002.
2002 E. Chow, A. Partridge, V. Chandrasekaran, M. Sheplak, T. Nishida, C. Quate, and T. Kenny,“Process Compatible Polysilicon-Based Electrical Through-Wafer Interconnects In Silicon Substrates”, J. Microelectromechanical Systems, vol. 11, no. 6, pp. 631-640, JUL, 2002.
2002 X. Li, R. Wu, M. Sheplak, and J. Li, “Multi-Frequency CW-Based Time Delay Estimation for Proximity Ultrasonic Sensors”, IEE Proceedings: Radar, Sonar, and Navigation, vol. 149, no. 02, pp. 53-59, JUL, 2002.
2002 X. Li, E. Larsson, M. Sheplak, and J. Li, “Phase-Shift Based Time-Delay Estimators for Proximity Acoustic Sensors”, IEEE Journal of Oceanic Engineering, vol. 27, no. 1, pp. 47-56, JUL, 2002.
2002 A K. V.S., J. Lim, K. Ngo, A. Kurdila, T. Nishida, M. Sheplak, and L. Cattafesta, “Energy Reclamation from a Vibrating Piezoceramic Composite Beam”, 9th International Congress on Sound and Vibration, Orlando, FL, July, 2002.
2002 S. Horowitz, A K. V.S., F. Liu, D. Johnson, T. Nishida, K. Ngo, M. Sheplak, and L. Cattafesta,“Technology Development for Self-Powered Sensors”, 1st AIAA Flow Control Conference, AIAA Paper 2002-2702, St. Louis, MO, June, 2002.
2002 T. Schultz, L. Cattafesta, T. Nishida, and M. Sheplak, “Uncertainty Analysis of the Two-Microphone Method”, 8th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2002-2465, June, 2002.
2002 D. Jansson, J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, “Design and Validation of an Aeroacoustic Test Facility”, 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.
2002 D. P. Arnold, T. Nishida, L. Cattafesta, and M. Sheplak, “MEMS-Based Acoustic Array Technology”, 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
2002 V. Chandrasekaran, M. Sheplak, L. Cattafesta, and B. V. Sankar, “Thermoelastic Actuation: Solution for Circular Composite Plates with Application in MEMS”, International Mechanical Engineering Congress and Exposition, ASME Paper IMECE2002-39334, New Orleans, LA, November, 2002.
2002 G. Wang, B. V. Sankar, L. Cattafesta, and M. Sheplak, “Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS”, International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.
2002 S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner”,International Journal of Aeroacoustics, vol. 1, no. 2, pp. 183-205, APR, 2002.
2002 M. Sheplak, A. Cain, T. Nishida, and L. Cattafesta, “Characterization of a Micromachined Thermal Shear Stress Sensor”, AIAA Journal, vol. 40, no. 6, pp. 1099-1104, APR, 2002.
2002 S. Prasad, B. V. Sankar, L. Cattafesta, S. Horowitz, Q. Gallas, and M. Sheplak, “Two-Port Electroacoustic Model of an Axisymmetric Piezoelectric Composite Plate”, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2002-1365, April, 2002.
2002 V. Chandrasekaran, E. Chow, T. Kenny, T. Nishida, L. Cattafesta, B. V. Sankar, and M. Sheplak,“Thermoelastically Actuated Acoustic Proximity Sensor with Integrated Through-Wafer Interconnects”, Solid-State Sensor and Actuator Workshop, Hilton Head, SC, pp. 102-107, June, 2002.
2001 V. Chandrasekaran, X. Li, T. Nishida, L. Cattafesta, J. Li, and M. Sheplak, “Thermoelastically Actuated MEMS Ultrasonic Transducer”, 142nd Meeting of the Acoustical Society of America, Ft. Lauderdale, FL, DEC, 2001.
2001 S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “Impedance tuning of an electromechanical acoustic liner”, presentation at the 142nd Meeting of the Acoustic Society of America, The Journal of the Acoustical Society of America, vol. 110, no. 5, pp. 2773, NOV, 2001.
2001 V. Chandrasekaran, E. Chow, T. Kenny, T. Nishida, and M. Sheplak, “Through Wafer Electrical Interconnects for MEMS Sensors”, Proceedings of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23846, vol. 2, New York, NY, November, 2001.
2001 D. P. Arnold, S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, “A Piezoresistive Microphone for Aeroacoustic Measurements”, Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
2001 S. Bhardwaj, M. Sheplak, and T. Nishida, “S/N Optimization and Noise Considerations for Piezoresistive Microphones”, 16th International Conference on Noise in Physical Systems and 1/f Fluctuations, Gainesville, FL, World Scientific, pp. 549-552, October, 2001.
2001 M. Sheplak, A. Padmanabhan, M. Schmidt, and K. Breuer, “Dynamic Calibration of a Shear Stress Sensor using Stokes Layer Excitation”, AIAA Journal, vol. 39, issue 5, no. 5, pp. 819-823, JUN, 2001.
2001 D. P. Arnold, T. Nishida, L. Cattafesta, and M. Sheplak, “Technology Development for Directional Acoustic Arrays”, 142nd Meeting of the Acoustical Society of America, Ft. Lauderdale, FL, DEC, 2001.
2001 S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, “Compliant-Backplate Helmholtz Resonators for Active Noise Control Applications”, 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0817, Reno, NV, January, 2001.
2001 X. Li, J. Li, and M. Sheplak, “CW-based Proximity Distance Measurement by Ultrasonic Sensors”, 142nd Meeting of the Acoustical Society of America, Ft. Lauderdale, FL, DEC, 2001.
2001 V. Chandrasekaran, A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, “Characterization of a Micromachined Thermal Shear Stress Sensor”, 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.
2000 V. Chandrasekaran, A. Cain, T. Nishida, and M. Sheplak, “Dynamic Calibration Technique for Thermal Shear Stress Sensors with Variable Mean Flow”, 38th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2000-0508, Reno, NV, January, 2000.
2000 R. Saini, S. Bhardwaj, T. Nishida, and M. Sheplak, “Scaling Relations for Piezoresistive Microphones”, International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000.
2000 J. Naughton, and M. Sheplak, “Modern Skin Friction Measurement Techniques: Description, Use, and What to Do with the Data”, 21st AIAA Advanced Measurement Technology and Ground Testing Conference, AIAA Paper 2000-2521, Denver, CO, June, 2000.
1999 A. Kurdila, B. Carroll, T. Nishida, and M. Sheplak, “Reduced Order Modeling for Low Reynolds Number Flow Control”, Proceedings of SPIEs 6th Annual International Symposium on Smart Structures and Materials, Mathematics Modeling and Control Conference, vol. 3667, Newport Beach, CA, pp. 68-79, March, 1999.
1999 M. Sheplak, “Aerodynamic Sensors Using Silicon Nitride Wafer-Bonding Technology”,First International Conference on Compliant and Alternative Substrate Technology, Orlando, FL, SEP, 1999.
1999 A. Kurdila, B. Carroll, T. Nishida, and M. Sheplak, “Reduced Order Modeling for Low Reynolds Number Flow Control”, Proceedings of SPIEs 6th Annual International Symposium on Smart Structures and Materials, Mathematics Modeling and Control Conference, vol. 3667, Newport Beach, CA, pp. 68-79, March, 1999.
1999 M. Sheplak, and J. Seiner, “A MEMS Microphone for Aeroacoustics Measurements”, 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.
1998 M. Sheplak, and J. Dugundji, “Large Deflections of Clamped Circular Plates Under Tension and Transitions to Membrane Behavior”, Thirteenth U.S. National Congress of Applied Mechanics, Gainesville, FL, JUN, 1998.
1998 M. Sheplak, A. Padmanabhan, M. Schmidt, and K. Breuer, “Dynamic Calibration of a Shear-Stress Sensor Using Stokes Layer Excitation”, 36th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 98-0585, Reno, NV, January, 1998.
1998 M. Sheplak, K. Breuer, and M. Schmidt, “A Silicon Micromachined Microphone for Aeroacoustics Measurements”, 51st Annual Meeting of APS Division of Fluid Dynamics, Philadelphia, PA, NOV, 1998.
1998 M. Sheplak, and J. Dugundji, “Large Deflections of Clamped Circular Plates Under Tension and Transitions to Membrane Behavior”, J. Appl. Mech., vol. 65, no. 1, pp. 107-115, JUN, 1998.
1996 M. Sheplak, A. Padmanabhan, M. Schmidt, S. Lee, and K. Breuer, “Dynamic Calibration of a Shear-Stress Sensor by Acoustic Waves”, 49th Annual Meeting of APS Division of Fluid Dynamics, Syracuse, NY, NOV, 1996.
1996 M. Sheplak, E. Spina, and C. McGinley, “Progress in Hot-Film Anemometry for Hypersonic Flow”, Experimental Thermal and Fluid Science, vol. 13, no. 1, pp. 21-28, JUL, 1996.
1995 M. Sheplak, E. Spina, and C. McGinley, “Characterization of a Hot-Film Probe for Hypersonic Flow”, 6th AIAA International Aerospace Plane and Hypersonic Technologies Conference, AIAA Paper 95-6110, Nashville, TN, April, 1995.
1994 M. Sheplak, and E. Spina, “Control of High-Speed Impinging Jet Resonance”, AIAA Journal, vol. 32, no. 8, pp. 1583-1588, JUL, 1994.
1994 M. Sheplak, E. Spina, and C. McGinley, “Hot-Film Anemometry in Hypersonic Flow”, 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2232, Colorado Springs, CO, June, 1994.
1994 C. McGinley, E. Spina, and M. Sheplak, “Turbulence Measurements in a Mach 11 Helium Boundary Layer”, 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2364, Colorado Springs, CO, June, 1994.
1994 M. Sheplak, E. Spina, C. McGinley, and M. Kegerise, “Dynamic Characterization of a Hot-Film Probe for Hypersonic Turbulence Measurements”, 47th Annual Meeting of APS Division of Fluid Dynamics, Atlanta, GA, NOV, 1994.
1993 M. Sheplak, C. McGinley, and E. Spina, “A Microsensor Hot-Film Probe for Hypersonic Flow”, 46th Annual Meeting of APS Division of Fluid Dynamics, Albuquerque, NM, NOV, 1993.

Contact us now to get more information about our services and products, place an order or to discuss how we can customize any of our products to meet your unique needs.